 |
| Love Body Aki in its original state |
Now, this "improvement" requires some level of being good at crafts, which as you will see later, I don't have...
What do you need?
For this project, you will need:
- Love Body Aki inflatable doll (or any other inflatable with small boobs).
- Quty Tits
- Velcro (if you want to be able to remove the Quty Tits for cleaning and storage)
- Super Glue (to seal the breast holes on the doll and reinforce the glue of the Velcro on the Quty Tits)
- Scissors
Steps (from the video)
- Cut the breasts from the Aki.
- Use pieces from the material and glue them over the two ventilation holes on each breast.
- Inflate the doll. That will allow you to check for leaks.
- Put Velcro on the doll. How much will depend on the quality of the Velcro and how strong you want the bond to be. (I used industrial strength velcro because it was the one I had available at the moment).
- Use the other side of the Velcro on the back of the Quty Tits. You probably will need to apply some Super Glue on the back of the tape to strengthen the adhesive.
- Put and press the Quty Tits on place.
- ENJOY!
Now, I know you want photos, so here they are...
I used also the 17 Bordeaux with this ensemble and man, IT WAS GREAT! You can put the Busty Ai-Chan on the doll, but you will have to leave the doll in missionary position (no velcro can hold those D-cups!)
The visuals of those massive tits waving on every thrust was incredible. Of course, if you want to dress the Aki to amp the fantasy levels, you can. Just remember that these toys will liberate some oily residue that can stain the clothes. Here I enjoyed the American standard of fucking the cheerleader...
If you want detailed steps on how to modify your doll, again, just go here and watch the video. You can watch it in YouTube from that link.
Enjoy!
I just bought a set of Quty tits with the same plan, but I was wondering if the superglue has caused any damage to the silicone? Does it hold pretty well? Thanks!
ReplyDeleteBy the way, this is an awesome blog. Not only is it super helpful to read reviews and get a better sense of what you're really getting for your money, its also just interesting to see all the products that are out there.
Thanks for the comment...
ReplyDeleteI used a superglue that is made specifically for plastics and rubber and used only a few drops to reinforce the adhesive from the velcro. So far, it has worked without damaging the Succubus skin (which is not technically silicone, although behaves very similar to platinum cured silicone).
Hi, how hard was the cleaning of the Quty Tits. Because I think water can get between the plastic and the boobs
ReplyDeleteI glued velcro to the back of the Quty Tits to make them removable and easier to clean. To avoid the velcro to get wet, I use a damp sponge with a few drops of hand soap when needed and rub the tits with that. After dry, I rub some cornstarch to keep them clean and non-sticky.
DeleteBoth the Quty and the Busty Ai-Chan are great toys, but they are a pain to keep clean!
Ah, thanks Casquetero. Thought velcro was some sort of glue. Thanks for the reply
ReplyDeleteHey Casquetero,
ReplyDeleteI have gotten a love body myself and find that it deflates about 1/4 in about a day's time. Is this normal? I tried looking for a hole, but I can't find any.
That deflating is bad news - it means you have a leak. Leaks are normal with all inflatable dolls and they can be a pain to find.
DeleteAn easy way to find leaks is to make a mix of dish washing soap with water, take the fully inflated doll to the shower and pour the soapy water over it. You will need to fix the doll whenever you see bubbles.
Dear Cas,
ReplyDeleteThanks for the tip, I spent some time looking on how to repair it and here's 2 good alternate methods.
Seems like mine had a pinpoint hole at at one of the seams - The solution was more brawny and simple than I thought - I ended up overinflating the doll and pushing very firmly into the doll in order to hear for any air wooshing out. The pinhole wasn't even visible then, so I ended up grabbing a eraser and placed it over various parts to finally locate it.
Submerging the doll under water works very well, granted you have a bathtub.
I initially tried using clear wrapping tape, but it doesn't work on seams. I ended up using a liquid adhesive bandage, which dries clear and fills space. Working great so far. Ironic I'd be using a real skin-care product on my inflatable.
Thanks again.
Oh if you only had one pair of breasts, would you rather have just glued them directly on?
I'm happy you were able to fix your love body. Leaks are of the reasons I am not a big fan of inflatable dolls.
DeleteI used the velcro because I wanted to use the breasts in other doll, but the idea did not work as I wanted. Now, is possible I use both breast toys in two homemade dolls I am planning, but still they are just ideas.
Yeah I certainly see leaks being a problem in the future. I think I'll have to invest in a quality clear plastic PVC sealant eventually.
DeleteThat being said, plain and simple, I'm a boob guy so I wanted to be able to mod the plastic body.
Is the Velcro relatively secure, or is it more trouble than its worth?
It is pretty secure if you use the industrial-strength type.
DeleteHey Cas,
DeleteSo after my 3rd leak and patch-job in the first week I've owned it I decided to convert my inflatable into a solid doll by stuffing it with a cotton-polyster mix. I gotta say, the end result is pretty damn awesome, and it only cost 12 bucks for the material.
It can handle body-weight perfectly fine, doesn't compress the insert, and is generally much more comfortable to toy around with.
Anyways I wanted to thank you for helping me out from the decision on which doll to buy (the inflatable or the meiki plush) and guiding me through dealing with the grievances of an inflatable. I guess I've struck a good medium between the two and had money leftover to mod the doll to my preferences.
Best regards
Stuffing an air doll is always an alternative. Good to hear that it worked for you!
DeleteHey Cas,
ReplyDeleteI'm trying to mod my love body's opening hole to be similar to that of the Meiki Plush Doll (MPD). But the thing is I'm not exactly sure what the path of the drawstring is, inside the MPD.
Does the drawstring only tighten the entrance of the tunnel, or does it tighten the entire canal?
Also is the canal's walls seem very rigid/tight or is it loosely packed?
Best regards
The drawstring only tightens the entrance of the tunnel. The canal walls are tightly packed (as in most plush dolls), so the string only needs to tighten the entrance.
DeleteGood luck with your mods!
Hey Cas,
ReplyDeleteI recently picked up a pair of breasts, and I am having troubles getting it to stick to the plastic doll. I have tried using various types of glue as well as velcro, and both have simply peeled off.
Did you do any special preparation to your doll's bust to secure it, and did you have any problems with the velcro peeling off the artificial skin?
Anonymous,
DeleteEverything depends on which pair of breasts you are trying to attach. The Quty Tits are relatively small (B cup) and light, so they are easy to attach. The Busty Ai-Chan weights like 7 pounds, so there is no glue or velcro that keep them in position (I use them on the doll only on missionary position).
Which breast toys are you trying to use?
Qutytits and Premium Super Soft D breasts are quite similiar, if I wanna apply bra on it, what size cup do You recommend sir
ReplyDeleteA B or a small C-cup should work well.
DeleteOk, thx for the reply Sir! :D
Delete